Original
By certification 
Ring die pellet mill working principle
The basic structure of the pelletizing chamber is mainly composed of these parts: the die, the rollers, feeding scraper and cutting knives.
When the machine is started, the electric motor will drive the ring die to rotate. And the rollers will also revolve on its own axis due to the friction between itself and the die. By means of gravity and the centrifugal force generated by rotating of the ring die, material will be firmly attached to inner surface of the ring die. The feeding scraper will ensure the material to be continuously and evenly pushed forward along the die to be prepared for pelletizing.
Then the material is squeezed by the roller and the die, and with the gradually increasing pressure, the density of the material also becomes higher. Thus the material temperature will rise, which softens the lignin in it and makes it easier to be shaped. At this time, the material is compressed into the die holes and shaped into small cylindrical strips with diameters of 2 - 12 mm (depending on the size of the holes).
Materials of Ring Die
1. Alloy dies
This is the choice for many feed processors because of their good abrasion and breakage resistance.
2. Carbon steel die
They have superior corrosion resistance, making them the choice for processing operations involving corrosive chemicals.
3. Stainless steel dies
They have the best abrasion and breakage resistance as well as good corrosion resistance.
Pellet machine roller shells and dies
1.High quality stainless steel
2.Wear resistance and long life
3.Specification customized
4.Mould for Ring Die Pellet Machine
5.Made of alloy steel or all stainless steel
6.Hole Diameter,Feed size 2-12mm; wood pellet size 6-12mm.
7.Tip-top quality
The basic structure of the pelletizing chamber is mainly composed of these parts: the die, the rollers, feeding scraper and cutting knives.
When the machine is started, the electric motor will drive the ring die to rotate. And the rollers will also revolve on its own axis due to the friction between itself and the die. By means of gravity and the centrifugal force generated by rotating of the ring die, material will be firmly attached to inner surface of the ring die. The feeding scraper will ensure the material to be continuously and evenly pushed forward along the die to be prepared for pelletizing.
Then the material is squeezed by the roller and the die, and with the gradually increasing pressure, the density of the material also becomes higher. Thus the material temperature will rise, which softens the lignin in it and makes it easier to be shaped. At this time, the material is compressed into the die holes and shaped into small cylindrical strips with diameters of 2 - 12 mm (depending on the size of the holes).
Materials of Ring Die
1. Alloy dies
This is the choice for many feed processors because of their good abrasion and breakage resistance.
2. Carbon steel die
They have superior corrosion resistance, making them the choice for processing operations involving corrosive chemicals.
3. Stainless steel dies
They have the best abrasion and breakage resistance as well as good corrosion resistance.
Pellet machine roller shells and dies
1.High quality stainless steel
2.Wear resistance and long life
3.Specification customized
4.Mould for Ring Die Pellet Machine
5.Made of alloy steel or all stainless steel
6.Hole Diameter,Feed size 2-12mm; wood pellet size 6-12mm.
7.Tip-top quality
